Monday, November 14, 2011

1st beam conquered!

Behind the scenes boards continued to be cut and stacked for our house.

On stage now are the major crossbeams. Two 500 pound pieces of wood cut on the sawmill from discarded local trees.

I wanted to show the work in progress of how these beams were set because the progress truly was a test of patience and ingenuity.  The collage below gives you some highlights.....

This three-day moving process involved NO power tools, just Kevin, ladders, scaffolding and an overhead homemade ridge crane with straps holding the beam in place.

A tedious but fulfilling event. I must admit the precarious positions involved in Kevin’s maneuvering these huge chunks of wood kept me at bay. However, when the 2nd one slipped into place and I realized how much closer we are to having our house and moving out of the trailer, proud excitement rushed through me.

Now on to the rafters and sub-floor joists!

~Cheryl 


Saturday, November 5, 2011

Adirondack Chairs ~ More Playing with Sticks


Using Kevin’s shop yard as a backdrop obviously isn’t as appealing as our still green yard, unless you’re a fellow carpenter builder welder etc, but until he finds time to build the staging area I want this will do. But I was iPod armed and can’t wait to share these lovely new Adirondack chairs he’s been working on.

A couple who had hoped to win the raffled off set of these chairs at the charity auction a few weeks ago requested these.

Simple armchairs and bench of wide pine slats of slanted backs and seats easily conjure up early fall suppers on the deck. It makes me think of Indian summers, tired scarecrows, late pumpkins and the leaves changing color.

They also bring me back memories of summer grilling, sunshine, cold beer and lemonade, water fights and lightening bugs.

Either way, they call us out of doors.

And of course, the pine, as always, is courtesy fall off from the Sawmill.

An unfinished set runs $175.00 
Single stained Finish – additional $20.00 charge
Blended Stain Finish – additional $50.00 charge
Pieces sold separately - $75.00 each

Dimensions:
Chair – 20 inches wide, front seat height 12 inches, 21 inch arm rest height, 20 inch seat depth
Bench – 48 inches wide – all other dimensions same as chairs

~ Cheryl
Available through Etsy:


Wednesday, November 2, 2011

Victorian Rustic Lantern


The Rustic look applies to metal as much as it does wood. And in describing this lantern I am inclined to move away from the Cowboy genre towards what my poet’s sense calls ‘Victorian Rustic’.

I imagine this garden beacon hanging just outside a crocheted lace-curtained window. And this window hangs on an antebellum house designed by collaboration between Woody Allen (circa Annie Hall) and Tim Burton (circa Edward Scissorhands).

And what title do we hang on the craftsman? Sculptor / welder / artist? It matters not. When Kevin works the creative process, or any of us for that matter, we transfer energy into a set of components set by choice and release a new form.

Sculpture is any 3 dimensional work of art. Art is a thought-provoking piece produced through creative activity. Work is a composition of one’s creativity and time.

Discarded but not forgotten in the realms of StickStoneSteel ~ Kevin Reclaimes ~ ~ ~

Housing the candle is a fire damaged propane tank. Balancing like a jagged halo a used ban saw blade teeters. Welded sturdy chain reach upwards reminiscent of both dungeons and ships tethers. Securing that equilibrium is a simple saw blade.

Friday, October 21, 2011

Benchables!



Jessica Daniels, owner operator of A Flair for Hair Salon in Milledgeville, Georgia whom is hosting the Charity auction at the Deep Roots Festival for two local ladies dealing with breast cancer and Hodgkin's lymphoma called and asked for more benches for the food court/eating area of the festival.

Kevin took stock again of his supplies and tools and went to work. His engineering background in manufacturing and design he put together a method of building them quickly but efficiently.

Once again using fall off wood from the sawmill, he found and inspiration in a long slice of trunk.  Leveling the piece on the sawmill he drilled 2-inch holes of deliberate spacing into them.

Then using a pipe threader machine he absconded from the local dump not long ago, he built a bit out of 2-inch pipe with teeth ground out using his angle grinder.   Giant toothpicks skinned and whittled down from a tree that didn't make it through a recent storm would become the legs. 

Arthur coined the name Benchables because they are suited for use as both benches and tables on a picnic table theme.

They run 4 feet in average length and range from 11 to 16 inches wide.


~Cheryl


Check them out at the Festival..............possible auction items........... !



Monday, October 17, 2011

End of Trail - Line Shack Benches



Along the original Cowboy trails, Kevin revisits the old west, dropping in on his StickStoneSteel genre to bring to life some old standards.

These Line Shack Benches are reminiscent of what the Cowhands may have built for the months they spent away from the ranch tending to cattle in the high pastures.

Kevin’s great Uncle migrated from Prussia to homesteaded in the Dakota Territory. His sons completed such tasks including the fencing and furnishing of the bunkhouses and what not.

Bow Saws, 1 and 2 man saws, an ax, a forge and hammers were among the tools that made the initial trip along side food staples, cookware and clothing. Then using what wood was left over from building fences and their housing, they put together a few luxuries. Tables and benches which would remain on site long after the cattle tending tour of duty was complete, set up for seasons to follow.

Now Kevin’s tools are electric and more calculating, but he builds in their spirit of making use of what is available. Where the Cowhands most likely used an old horseshoe Kevin uses scrap iron and saw blades.

The benches seen here are made from pine slabs, scrap iron and used saw blades cut and forged to fit the design. They are a bit upscale from what their ancestors looked like, complemented with stain washes and readymade bolts from an old futon frame but they do inspire a campfire cookout.

Come sit a spell. 

These benches will be on site at the "Deep Roots Festival" in Milledgeville,  Georgia on Saturday October 22nd.   

We owe thanks for this opportunity to Jessica Danials, owner operator of A Flair for Hair Salon here in Milledgeville,  whom is hosting the Charity auction at this festival for two local ladies dealing with breast cancer and Hodgkin's lymphoma.


~Cheryl


P.s. These are prototype pieces, 76 inches long, 17 inches in height with a bench width of 15 inches. What would you pay for something like this?

Possible options are cushioned, and different ranges of finishes, you tell us, and we’ll go from there…

Friday, October 14, 2011

Sunburst Table - StickStoneSteel 1st Appearance!


Recently one of our previous clients asked told us about a non-profit charity auction she is holding to benefit for two women; one dealing with breast cancer and the other hodgkin’s lymphoma. She asked Kevin if he would donate some of what she calls his ‘rustic’ hand made furniture for the cause. He happily complied. 

She then asked if he could supply benches and tables for the food court seating of the Deep Roots Festival, Milledgeville, Georgia where her auction will take place.

With less than a month to go, Kevin plunged into his "StickStoneSteel" mode.  Between the Saw Mill fall off and the collection of items collected and obtained over time his palate was already full.

He’d already been playing with forge bending steel for benches for our own deck so Naturally while his mind clicked away at designs for benches made out of fall off wood he came into the house and asked me for whatever poster paint Arthur had left over in the craft cupboard.

Within in minutes, under the carport he had a concrete garden walk paver balancing on a couple bags of concrete and was joyfully painting away like a happy kid. 

With limited colors, he went freewheeling; digging at the bottom of the bottles where the thick colored gook had accumulated. He managed to scrape more than enough yellow for the center.  I watched him artfully dash out orange and red rays from that yellow core.  I am pretty sure he was fighting the urge to unleash a wild splattering of paint at it but refrained.

Hours later, after the paint had dried he brought the stand to the house.  Chain welded together for the tripod legs with a used saw blade to secure the balance. What you can’t see from this picture is an old grinding wheel holding the concert paper in place with a heavy nut and bolt.

Arthur has made a request that Kevin build one like this for his room.  I want one too!   Guess we’ll have to get more poster paint.  :)

~Cheryl

Saturday, October 1, 2011

Celtic Propane Tank Bell



"Made from an old Propane Tank,Gloss black paint and with the red I've garnished it with a hand designed Celtic Weave. I am unsure of the proper term, but the 'banger' is made of pine. Sounds nice." - KR

Check out Kevin's new Etsy page:

http://www.etsy.com/people/KevinGoingGreen

And, we're waiting to hear from you..........I know you've got DIY dreams.............

~ Cheryl